RAIS/attika Q-Tee II GAS Bedienungsanleitung Seite 180

English
Positioning of Logs and Embers
Spread the content of the bag of "Embers" as shown in the illustration.
Note: The pilot area must be kept clear of "Embers". Be sure not to
block the holes of the center burner. Position the 8 logs as shown. Note,
the two special logs marked A and B have a groove moulded on their
undersides that fits on top of the two secondary burners. The glow wires
are positioned between the "Embers" on the center burner to empha-
sise the glow effect.
34
attika
RAIS/ - User manual for Q-Tee II Gas / Q-Tee II C Gas
1
2
Log 1
Log 2
Log 2 must not touch
the 2nd thermosensor