Chauvin Arnoux PAC 20 Bedienungsanleitung Seite 9

Thank you for purchasing a Clamp-on current transformer. To
get the best service from this instrument:
read this user's manual carefully
respect the safety precautions detailed
Meaning of the symbol
Warning ! Please refer to the User's Manual before using the
instrument.
In this User's Manual, the instructions preceded by the above
symbol, should they not be carried out as shown, can result in a
physical accident or damage the instrument and the installations.
Only use the PAC 20 clamp indoors.
Do not expose the clamp to running water.
Do not use the PAC 20 clamp on conductors at a voltage of
more than 600 V in relation to the earth.
For measurements on DC current, check zero output. Adjust if
necessary (see " Operating procedure").
During measurement, ensure that the conductor is in line with
the markings on the jaws and that the clamp closes correctly.
Your clamp is supplied with a set of adhesive labels. Choose
the label for your and stick it to the back of the case.
Our guarantee is applicable for twelve months after the date
on which the equipment is made available (extract from our
General Conditions of Sale, available on request).
Clamp PAC 20 ....................................................... P01.1200.71
Supplied with a 9 V battery, a set of labels in 5 languages
to stick to the instrument, and a User Manual.
ENGLISH
SAFETY PRÉCAUTIONS
WARRANTY
TO ORDER
9
Ref.