Playback Of Mp3 Song Via Usb Storage Media Or Memory Card - auna 388 DAB+ Bedienungsanleitung

CD/MP3 disc programming (by remote control)
Up to 20 tracks can be programmed for CD or MP3 file and play in any
order. Before use, be sure the system is at stop mode before programming:-
1. Set in CD/USB/SD mode & stop the CD/MP3 disc playback.
2. Press the "Program" button on the remote control, "MEM" indicator will
appear on LCD display. Moreover, it will indicate program no. and digits
for track no. to be programmed.
3. Select a desired track by pressing skip  or  buttons.
4. Press the " Program " button to store the track into memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if
necessary.
6. When all the desired tracks have been programmed, press CD "Play/
Pause " button to play the disc in assigned order.
7. To cancel the programmed file, press "Stop" button twice until the MEM
indicator is disappear on LCD display.
PLAYBACK OF MP3 SONG VIA USB STORAGE
MEDIA OR MEMORY CARD
Connecting
The system is able to decode and playback all
MP3 file which stored in the memory media with
USB connecting port.
1. Press the Power on/off / Function button (13) to
turn on the unit and press the button again to
switch the function to USB mode.
2. Plug-in the USB plug with the face up & make sure it going into
completely. Insert straight without bending.
Connecting the USB upside down or backwards could damage the audio
system or the storage media. Check to be sure the direction is correct
before connection.
3. The system will start reading the storage media automatically after
connecting, and LCD display will show the track no. and the playback
time.
4. Repeat the same playback procedure as playing CD/MP3 disc as above.
Remarks
• The system can detect and read the file under MP3 format only though
the USB socket.
EN
41