auna 388 DAB+ Bedienungsanleitung Seite 46

EN
46
2. Keep pressing the button to adjust the sleep timer in the order of
120>90> 60 > 45 >....15 minutes respectively and sleep icon
indicate on LCD.
3. System will stop and go to standby mode automatically after running
the selected time.
4. To cancel the sleep mode, press "Sleep" button until "SLP-off" is
displayed and the
B. Timer clock setting (on remote control only)
This function allows the system to turn on automatically and wake you up
by CD, DAB, FM Radio, USB/SD mode respectively.
First, set the unit at standby mode and then press & hold the "Timer" button
on the remote control to enter the setting mode, the LCD display will show
"SET TIMER"; then change to "SELECT SOURCE" and timer
on display :-
1. Wake up source: press the "Function" button repeatedly to select the
source from "CD" -- "FM" -- "DAB"-- "USB" –"SD". Press "Timer" button to
confirm the selected source.
2. Wake up volume: press the / button to adjust the wake up volume
level then press "Timer" button to confirm the wake up level.
3. Wake up time: press / button to set the hour & then press "Timer"
button to enter the hours. Press Skip up /down button to set minutes
and press "Timer" button to store the memory.
Remark
• If there is no music source being detected (such as USB/CD) when the
preset time is reached, system will default to FM mode automatically.
• For FM or DAB radio wake up, the system will preset at the latest radio
frequency being listened before switching off.
• Please switch off the system manually during alarm wake up mode as
the system will not turn off automatically after alarm on mode.
Active/de-active timer function
1. To active the timer, press once the "Timer" button on remote handset
until the timer indicator
2. To cancel timer function by press once again "Timer" button until the
timer indicator disappears.
C. Pre-set EQ function
This unit provides 4 differences sound mode to enhance your listening
experience. You can select the desired effect by pressing the "Preset EQ"
button (22) repeatedly at following sequence:-
indicator disappear on LCD display.
is shown on LCD display (2).
will
icon will flash