Cpr Performance Monitoring; Breathing Parameters - laerdal Resusci Anne Gebrauchsanweisung

BP: 120 / 80 P: N 4
When systolic is highlighted, only systolic will change, but diastolic
will be kept at least 10mm Hg below systolic.
BP: 120 / 80 P: N 4
When diastolic is highlighted, only diastolic will change, but systolic
will be kept at least 10mm Hg above diastolic.
The up/down navigation buttons are used to change selection.
Set PEA quick execution button will set BP to 0/0. Reset PEA will
set the BP back to what it was before Set PEA was selected.
Use the +/- quick execution buttons to alter volume of Korotkoff
sounds directly.
Pulse strength is indicated as P:N (Normal), P:W (Weak) or P:S
(Strong)
Set BP menu:
Set Blood Pressure
Systolic Diastolic Vol Gap
120 80 5 OFF
– + –
SetPEA BP
Use left/right navigation buttons to select function.
Systolic and Diastolic BP can be adjusted using the up/down buttons,
the BP +/- quick execution buttons or entered directly by using the
numeric buttons. If the running rhythm is VF or Asystole, BP cannot
be set.
Volume can be adjusted using the +/- or the up/down buttons or
directly through the numeric buttons.
Ausculatory Gap (Korotkoff sound disappears in part of Phase II) can
be toggled on/off using the up/down buttons.
Pulse strength can be adjusted using the up/down buttons.

CPR Performance Monitoring

On the main display, use the left/right navigation buttons to highlight
the Logging functional area at the top of the screen. Press CPR-stat
quick execution button to activate the real-time CPR performance
overview.
05:24 Logging [Logname]
A: Sinus 80
L.Lung: Normal
R.Lung: Normal
No Waiting Rhythm
Heart: Normal
Defib. Enabled
Vocal: Cough
BP: 120 / 80 P: N 4
Breathing Rate: 14
Event CPR-stat Save
The CPR Statistics overview allows the instructor to monitor ven-
tilation, compression and hands-off time. The values are updated
automatically every 30 seconds.
Pressing the Refresh quick execution button updates the values.
Pulse
Normal
+
4
4
4
4
M
Ventilations:
Correct: 26.7%
Average volume 98 cl
Compressions:
Correct: 28.4%
Average rate: 127/min
Hands off:
Current: 3 sec Total: 21 sec

Breathing Parameters

00:00 Logging [Logname]
A: Sinus 80
L.Lung: Normal
R.Lung: Normal
No Waiting Rhythm
Heart:
Defib. Enabled
Vocal:
BP: 120 / 80 P: N 4
Breathing Rate: 12
Set Apnea Set Mode
On the main display, using the left/right navigation buttons highlight
the Breathing functional area. Airway obstruction, spontaneous
breathing, supplemental oxygen and breathing rate settings can be
set directly from the main display using the quick execution buttons
located at the bottom of the screen.
Set Breathing Rate
On the main display, using the left/right navigation buttons, highlight
the Breathing functional area. The breathing rate may be adjusted
using the BR +/- quick execution buttons in steps of 5 between 0
and 60 breaths per minute. The user may also press OK to activate
the Breathing Rate menu allowing the breathing rate to be manually
adjusted with the numeric buttons to enter a specific breathing rate.
Set Airway Parameters
Breathing Airway Chest Rise
Rate
14
Open ON
Set Apnea
Set Apnea will set breathing rate to 0. Reset Apnea will restore the
previously set breathing rate.
Set Airway Obstruction (Open/Closed) Mode
00:00 Logging [Logname]
A: Sinus 80
L.Lung: Normal
R.Lung: Normal
No Waiting Rhythm
Heart:
Defib. Enabled
Vocal:
BP: 120 / 80 P: N 4
Breathing Rate: 12
Set Apnea Set Mode
On the main screen use the left/right navigation buttons, highlight
the Breathing functional area and press OK to advance to the Set
Airway Parameters menu.
11
Refresh
4
4
Normal 4
Cough 4
A
Set O
2
O
2
Supplied
OFF
– +
BP
4
4
Normal 4
Cough 4
A
Set O
2