Blood Pressure And Pulse - laerdal Resusci Anne Gebrauchsanweisung

Set Bilateral Lung Sound
1 Normal
2 Crackles
3 Rhonchi
4 Pneumonia
5 Stridor
6 Wheezes
7 No Sound
Set LL Set RL
The sounds can be selected using the up/down navigation buttons
or using the numeric buttons. The arrow on the bottom right of the
selection field indicates that there are more selections than pre-
sented on the screen.
Volumes can be adjusted using the +/- quick execution buttons, or
by highlighting the volume field and then use the up/down
navigation buttons or the numeric buttons.
Set Right Lung Sound
1 Normal
2 Crackles
3 Rhonchi
4 Pneumonia
5 Stridor
6 Wheezes
7 No Sound
Set RL = LL Set LL
Set LL and Set RL quick execution buttons are alternative ways to
select individual (unilateral) lung sounds.
Press OK to implement the new selection and return to the main
screen.
Press C to return without any changes.
Set Heart Sounds
Set Heart Sound
1 Normal
2 Aortic Stenosis
3 Austin Flint Murmur
4 Friction Rub
5 Mitral Valve Prolapse
6 Systolic Murmur
7 Diastolic Murmur
Heart sounds are set in the same manner as Lung sounds. On the
main display, using the left/right navigation buttons highlight the
sounds functional area. Scroll down to the Heart sound.
Use the +/- quick execution buttons to alter volume directly, or
Recall to recall the previously selected Heart sound.
Press OK to get to the Heart sounds selection menu.
Set Vocal Sounds
00:00 Logging [Logname]
A: Sinus 80
L.Lung: Normal
R.Lung: Normal
A> V.fib Coarse
Heart:
Defib. Enabled
Vocal:
BP: 120 / 80 P: N 4
Breathing Rate: 14
Cough Moan Vomit
LL RL
Vol Vol
5 5
– +
Volume
5
– +
Volume
5
– +
4
4
Normal 4
Cough 4
M
– +
On the main display, using the left/right navigation keys highlight the
Sounds functional area. To alter the Vocal sound, scroll down and
highlight Vocal.
Note: Whenever the Sounds area is selected, the selected Vocal sound
can be activated using the quick execution button. Most sounds are acti-
vated once. The continuous sounds are toggled on/off. When Vocal is
selected, the three last used sounds are available as quick execution
buttons. Use the quick execution buttons to activate a new sound direct-
ly or press OK to get to the Vocal sounds selection menu.
Set Vocal Sound
1 Cough
2 Moan
3 Vomit
4 Scream
5 SOB Breathing (continuous)
6 Yes
7 No
Some vocal sounds are continuous. A continuous sound will be
repeated until the sound is selected again or another sound is acti-
vated.
Use the +/- keys to alter volume directly.

Blood Pressure and Pulse

The set blood pressure (BP) affects the pulse strength. The Normal
pulse can be adjusted to three levels; weak, normal or strong. If the
pulse is set to be normally weak, a weak pulse because of low BP
will be almost impossible to detect.
If the Running rhythm is a rhythm with no BP, i.e. VF or Asystole, BP
will automatically be set to 0/0.
Note: The BP is not automatically set back to normal if a perfusing rhyt-
hm is chosen.
Set Blood Pressure
00:00 Logging [Logname]
A: Sinus 80
L.Lung: Normal
R.Lung: Normal
No Waiting Rhythm
Heart:
Defib. Enabled
Vocal:
BP: 120 / 80 P: N 4
Breathing Rate: 14
– +
SetPEA BP
On the main display, using the left/right navigation buttons highlight
the Blood Pressure functional area. Press OK to activate the BP
menu or adjust BP directly using the BP +/- quick execution buttons
Using the BP +/- buttons
BP: 120 / 80 P: N 4
When both systolic and diastolic are highlighted, both pressures will
change and maintain the difference.
10
Volume
5
– +
4
4
Normal 4
Cough 4
M
– +