Control Panel; Daily Use - Zanussi ZFU20200WA Benutzerinformation

Control panel

1
Flaps
2
Freezer baskets
3
Control panel
Alarm Light
1
Fast Freeze Indicator
2
Fast Freeze Switch
3
Pilot Light
4
Temperature Regulator
5
Switching on
Insert the plug into the wall socket.
Turn the Temperature regulator clockwise to a
medium setting.
The Pilot light and the Alarm light will light up.
Switching off
To turn off the appliance, turn the Temperature
regulator to the "0" position.
Temperature regulation
The temperature is automatically regulated.
To operate the appliance, proceed as follows:
• turn the Temperature regulator toward lower
settings to obtain the minimum coldness.
• turn the Temperature regulator toward high-
er settings to obtain the maximum coldness.

Daily use

Freezing fresh food
The freezer compartment is suitable for freez-
ing fresh food and storing frozen and deep-
frozen food for a long time.
To freeze fresh food activate the Fast Freezing
function at least 24 hours before placing the
food to be frozen in the freezer compartment.
Place the fresh food to be frozen in the top
compartment.
www.zanussi.com
Rating plate
4
Maxibox baskets
5
1 2 3 4
The intermediate position is usually the most
suitable.
However, the exact setting should be chosen
keeping in mind that the temperature inside
the appliance depends on:
• room temperature
• how often the door is opened
• the quantity of food stored
• the location of the appliance.
Fast Freeze function
To activate the Fast Freeze function, press the
Fast Freeze switch.
The Fast Freeze light will light up.
Excessive Temperature Alarm
In the event of an abnormal temperature rise
inside the freezer (e.g. power cut) alarm light
comes on.
When normal conditions are restored the
alarm light will switch off automatically.
The maximum amount of food that can be fro-
zen in 24 hours is specified on the rating plate,
a label located on the inside of the fridge.
The freezing process lasts 24 hours: during
this period do not add other food to be frozen.
After 24 hours, when the freezing process is
completed, deactivate the Fast Freezing func-
tion (see "Fast Freezing function").
5
5