Control Panel; Before First Use - Zanussi ZCAN26EW1 Benutzerinformation

CONTROL PANEL

CONTROL PANEL
1
5
Temperature indicator
1
SUPER indicator
2
SET button
3
OFF button
4
Running indicator
5
SWITCHING ON/OFF
1. To switch on the appliance insert the plug into
the mains socket.
2. If the indicators are off, press the OFF button
for 3 seconds.
3. To switch off the appliance, press the OFF
button for 3 seconds.
TEMPERATURE REGULATION
To set the temperature:

BEFORE FIRST USE

WARNING! Refer to Safety chapters.
CLEANING THE INTERIOR
Before using the appliance for the first time, the
interior and all internal accessories should be
washed with lukewarm water and some neutral
soap to remove the typical smell of a brand-new
product, then dried thoroughly.
8
2 3
4
1. Press SET button repeatedly until you reach
the desired temperature.
MAX setting is the coldest one.
2. The temperature sets 5 seconds after the last
press.
The exact setting should be chosen keeping in
mind that the temperature inside the appliance
depends on:
• room temperature
• how often the lid is opened
• the quantity of food stored
• the location of the appliance.
SUPER FUNCTION
The SUPER function accelerates the freezing of
fresh food and, at the same time, protects already
stored foodstuffs from undesired warming.
To activate the function:
1. Press SET button repeatedly until the SUPER
indicator lights up.
2. The function sets 5 seconds after the last
press.
The SUPER function stops automatically after 52
hours and the temperature goes back to the
previous setting.
You can stop the function manually before that time,
by pressing the SET button and setting the desired
temperature.
RUNNING INDICATOR
This indicator is on when the compressor operates
and it turns off when the compressor stops
working.
CAUTION! Do not use detergents,
abrasive powders, chlorine or oil-
based cleaners as they will damage
the finish.
ELECTRICAL CONNECTION
When you connect the appliance to the power
supply, or it turns on after a power failure all
indicator lights flash once. Then the appliance
returns to the previous setting.