Ventilation Requirements; Operation; Control Panel - Zanussi ZQF11430DA Benutzerinformation

Climate
Ambient temperature
class
ST +16°C to + 38°C
T +16°C to + 43°C
Some functional problems might occur
for some types of models when
operating outside of that range. The
correct operation can only be
guaranteed within the specified
temperature range. If you have any
doubts regarding where to install the
appliance, please turn to the vendor,
to our customer service or to the
nearest Authorised Service Centre.
ELECTRICAL CONNECTION
• Before plugging in, ensure that the voltage and
frequency shown on the rating plate correspond
to your domestic power supply.
• The appliance must be earthed. The power
supply cable plug is provided with a contact for
this purpose. If the domestic power supply
socket is not earthed, connect the appliance to

OPERATION

CONTROL PANEL

Power indicator light
1
Temperature regulator
2
FastFreeze light
3
SWITCHING ON
Connect the appliance to the main power supply.
1. Turn the Temperature regulator clockwise to a
medium setting.
1 2
a separate earth in compliance with current
regulations, consulting a qualified electrician.
• The manufacturer declines all responsibility if
the above safety precautions are not observed.
• This appliance complies with the E.E.C.
Directives.

VENTILATION REQUIREMENTS

The airflow behind the appliance must be sufficient.
5 cm
CAUTION! Refer to the assembly
instructions for the installation.
3 4 5
FastFreeze switch and alarm reset switch
4
Alarm light
5
The power indicator light will light up and a sound
will signal for 2 seconds.
min.
200 cm 2
min.
200 cm
2
17