Operation; Control Panel - Zanussi ZFC649WAP Benutzerinformation

• This product must be serviced by an author-
ized Service Centre, and only genuine spare
parts must be used.
Environment Protection
This appliance does not contain gasses
which could damage the ozone layer, in ei-
ther its refrigerant circuit or insulation materials.
The appliance shall not be discarded together

Operation

Switching on
Insert the plug into the wall socket.
The Pilot light will light up.
Turn the Temperature regulator clockwise.
Important! If the temperature inside the
appliance is too high the Alarm light will light
up.
Switching off
To turn off the appliance, turn the Temperature
regulator to the OFF position.
Temperature regulation
The temperature is automatically regulated.
To operate the appliance, proceed as follows:
• turn the Temperature regulator towards
obtain the minimum coldness.
• turn the Temperature regulator towards
obtain the maximum coldness.

Control panel

1
5
Pilot light
1
High temperature alarm light
2
14
to
to
2 3
4
with the urban refuse and rubbish. The insula-
tion foam contains flammable gases: the appli-
ance shall be disposed according to the appli-
cable regulations to obtain from your local au-
thorities. Avoid damaging the cooling unit, es-
pecially at the rear near the heat exchanger.
The materials used on this appliance marked by
the symbol are recyclable.
A medium setting is generally the most
suitable.
However, the exact setting should be chosen
keeping in mind that the temperature inside the
appliance depends on:
• room temperature
• how often the lid is opened
• the quantity of food stored
• the location of the appliance.
Fast Freezing light
3
Fast Freezing switch
4
Temperature regulator
5
Fast Freezing function
You can activate the Fast Freezing function by
pressing the Fast Freezing switch.
The Fast Freezing light will light up.
It is possible to deactivate the function at any
time by pressing the Fast Freezing switch. The
Fast Freezing light will switch off.
www.zanussi.com