Description Of The Tyre Changers; Technical Brief; Machine Kit; Optional Accessories - Rema Tip Top PROMAXX 8150 Betriebsanleitung

the machine and consult it whenever you are
in need of confirmation or explanations.
WarNiNG
Do not remove or deface the safety Danger,
Warning or instruction decals. replace any
missing or illegible decals. missing or dama-
ged decals can be obtained at your nearest
manufacturer dealer.
- When using and carrying out maintenance on
the machine observe the unified industrial
accident prevention regulations for high
voltage industrial equipment.
- Any unauthorised alterations made to the
machine automatically release the manufac-
turer from any liability in the case of damage
or accidents attributable to such alterations.
Specifically, tampering with or removing the
machine's safety devices is a breach of the re-
gulations for industrial accident prevention.
WarNiNG
When operating or servicing equipment do not
wear ties, loose fitting clothes, necklaces or
wristwatches and any other articles that could
become entrapped by moving parts. Tie back
long hair or cover with a scarf or a cap.
DESCriPTioN oF THE
TYrE CHaNGErS
The PROMAXX 8150 are electrohydraulic tyre
changers.
The machines are designed to mount and
demount tyres on all types of integral wheels
with drop centre and weights and dimensions as
described in the heading TECHNICAL BRIEF.
The machines are solidly constructed. They
operate with the wheel in a vertical position
for bead breaking and horizontal for mounting
and demounting tyres. All machines movements
are controlled by the operator by means of
the pedals.
- E - Operator's manual
nglIsh

TECHNiCaL BriEF

- Table top clamping capacity:
• inside clamping: .................... 13" to 23"
• outside clamping: ................. 10" to 20"
- Bead breaker pressure 15.500 N (at 10 bar)
- Bead breaker opening ................ 320 mm
- Max. tyre diameter ................... 980 mm
- Max. tyre thickness ........................12"
- Air pressure ......................... 8 - 10 bar
- Table top rotation torque .......... 1.000 Nm
- Dimensions (fig.5):
• Max. height ........................... 1950 mm
• Max. width ............................ 950 mm
• Max. depth ............................ 870 mm
- Weight:
• PROMAXX 8150 .............196 kg (FI 210 kg)
- Power supply
• Three-phase ........230/400±10%V 50/60 Hz
• Single-phase ........115/230±10%V 50/60 Hz
- Motor:
• Three-phase ............................0.55 kw
• Single-phase ........................... 0.55 kw
- Noise level when running ........≤ 70 dB (A)

maCHiNE KiT

Grease gun (or brush) ................900432739
Brush (or grease gun) .................900415248
Inflator gun (not FI) ...................900434804
Tyre lever ..............................900444288

oPTioNaL aCCESSoriES

Set of four 8" adapters .............8-11100042
Set of four +4" adapters ............8-11100041
Set of four motorcycle adapters ...8-11100036
Motorcycle bead breaker: ...........801260402
23