Introduction; Transport, Storage And Handling; Conditions For Transporting The Machine; Ambient Conditions For Storage And Transport - Rema Tip Top PROMAXX 8150 Betriebsanleitung

iNTroDUCTioN

The purpose of this manual is to furnish the
owner and operator with a set of practical,
safe instructions for the use and maintenance
of the PROMAXX 8150 tyre changers.
Follow all the instructions carefully and your
tyre changer will assist you in your work and
give lasting and efficient service in keeping with
the manufacturer traditions.
The following paragraphs define the levels of
danger regarding the machine associated with
the warning captions found in this manual:
DaNGEr
Refers to immediate danger with the risk of
serius injury or death.
WarNiNG
Dangers or unsafe procedures that can cause
serious injury or death.
aTTENTioN
Dangers or unsafe procedures that can cause
minor injuries or damage to property.
Read these instructions carefully before powe-
ring up the machine. Conserve this manual
and all illustrative material supplied with the
machine in a folder near the tyre changer where
it is readily accessible for consultation by the
machine operator.
The technical documentation supplied is con-
sidered an integral part of the machine; in the
event of sale all relative documentation must
remain with the jack.
The manual is only valid for the machine model
and serial number indicated on the nameplate
applied to the machine itself.
WarNiNG
adhere to the contents of this manual: the
manufacturer declines all liability in the
case of actions not specifically described and
authorised in this manual.
NoTE
Some of the illustrations in this manual have
been taken from photographs of prototypes; the
standard production model may differ slightly
in certain respects.
These instructions are for the attention of
persons with basic mechanical skills. We have
therefore condensed the descriptions of each
operation by omitting detailed instructions
regarding, for example, how to loosen or ti-
20
ghten the fixing devices on the machine. Do not
attempt to perform operations unless properly
qualified and with suitable experience. In case
of need, please contact our nearest authorised
Service Centre for assistance.
TraNSPorT, SToraGE aND
HaNDLiNG
Conditions for transporting the
machine
The tyre changer must be transported in its
original packing and maintained in the position
shown on the outer packing.
- Machine packing dimensions:
• width .................................. mm 800
• depth ................................mm 1140
• height ................................. mm 970
- Shipping weight:
PROMAXX 8150 (FI) .......... kg 221 (239 Kg)
ambient conditions for storage and
transport
Temperature range from -25° to +55°.
WarNiNG
Do not stack other goods on top of the packing
or damage may result.
Handling
To move the packed machine insert the forks
of a pallet truck in the channels in the base of
the pallet (Fig.1).
Before moving the machine refer to the chapter
HOISTING AND MOVING
- E - Operator's manual
nglIsh