MTR+ Myolito Bedienungsanleitung Seite 31

2. By pressing the program button „P" you can choose from the programs
01 – 11 (pre-programmed).
3. This is followed by pressing the buttons „+/-" below the channel used. The
selected program runs automatically and the LCD displays the intensity as
milliamps (mA).
Program
Mode
Intensity
Channel A
In the upper row you can see the remaining program time and in the bottom
line the intensity being applied to each channel. If the button „+" is pressed
repeatedly the intensity of stimulation increases. If the button „-„ is pressed
repeatedly the intensity of stimulation is reduced. For the setting of the inten-
sity it is vital that one feels the electric current but that pain never occurs.
4. If you wish to interrupt the program, press the button „S" once and the
program will pause. The program will resume for the remaining program time
when pressing this button once again. In this case, the intensity increases
within one second to the previous used value.
5. By pressing the „P" button you pause as well, but you can continue with
new intensity adjustment by pressing the +button. If you press „P" a second
time the program is finished.
6. Myolito is switched off when pressing the button „On/Off" or automati-
cally one minute after the program is finished.
Myolito Bedienungsanleitung / Operators Manual
31
Remaining
Program Time
Intensity
Channel B