Centrostyle 5400 Gebrauchs- Und Wartungshandbuch Seite 28

2 Press "Set" again for 2 sec. and, using the + · and - » keys, select the
vibration mode (continuous, pulsating or intermittent) whilst it is flashing.
3 Press "Set" again for 2 sec. and, using the + · and - » keys, select the desired
temperature (from 15° to 60°) whilst the figure is flashing.
4 Lastly, press the key for 2 sec. to exit the "Set" mode and use the cleaner.
The "Set" function is disabled when the cleaner is running.
"Prog" key ´ :
• Press in quick succession to view the 10 washing programs available.
Each time the key is pressed, the No. of the program followed by the preset
values is shown on the display for 1 sec. The P8 and P9 programs are
available for the user's personalized settings.
• To store personalized settings, select P8 or P9 and follow the instruction in
the "Set Key" paragraph. Exit the "Set" mode and hold down the " Prog "
key ´ for 2 sec.
• If the need arises, the programs from P0 to P7 can be modified using the
same procedure.
Table of Programs
Program
P0
P1
P2
P3
P4
P5
P6
P7
P8
P9
The "Prog" function is disabled when the cleaner is running.
GB
7
Time
3'
6'
3'
5'
8'
4'
8'
18'
Not programmed
Not programmed
Temperature
15°C
15°C
30°C
30°C
30°C
45°C
45°C
60°C
15°C
15°C
Vibration mode
Continuous
Continuous
Continuous
Pulsating
Intermittent
Continuous
Pulsating
Intermittent
Continuous
Continuous