Measure Mains Voltage - Silvercrest EM240-A DE Bedienungsanleitung

4. Press the "SET" button 2 . The first digit flashes.
5. Press the "UP" 5 or "DOWN" button 4 to set the
6. Press the "SET" button 2 to move to the next digit.
7. Repeat steps 5 and 6 until you have set the required
8. When you have set the value for the last digit, press the
note: as soon as the entered overload warning values are
exceeded by any connected electrical appliance you are
testing, the overload symbol 7 flashes and a warning
signal sounds.
Q 
j 
56861_Energiekostenmessgeraet_Content_GB-HR-RO-BG-GR-DE.indd 21
the overload warning value for power consumption (W) 8
or the overload warning value for current (A) 9 .
required value.
overload warning value.
"PRICE" button 3 to confirm your entry.

Measure mains voltage

P ress the "DOWN" button 4 until the Volt symbol 10
appears in the centre of the LC display 1 .
note: the "Measure mains voltage" function is the
standard setting for the wattmeter. As soon as the isolating
strip between the two round cell batteries is removed, the
wattmeter is automatically in this mode.
Operation
GB 21
25.11.10 17:06