Setting The Time (Fig. A); Operation; Weighing (Fig. A) - Silvercrest Z30441A Bedienungs- Und Sicherheitshinweise

e Preparing the product for use / Operation

Setting the time (Fig. A)

After you have inserted the batteries, the scale switches auto-
matically into the time mode
s switched into the time mode
e the LC display
If the scale is in the weighing mode, press and keep pressed
the MODE button
. mode
Press and keep pressed the TARE button
Press the MODE button
Press and keep pressed the MODE button
the value-setting process.
Press the TARE button
hour value flashes.
Press the MODE button
. Press and keep pressed the MODE button
the value-setting process.
Press the TARE button
Note: If you do not press another button within 20 seconds,
the set value stops to flash and the time is set.
e.

Operation

t-

Weighing (Fig. A)

d
If the scale is in the time mode
once to switch into the weighing mode.
Note: Shortly before the scale switches into the weighing
mode, the scale shows "HELO" in the display for 1–2 sec-
onds.
1. Place the kitchen scale on a solid, flat surface.
2. Press the MODE button
unit indicator (g / lb'oz).
66233_silv_Kuechenwaage_Content_LB4.indd 11
. As soon as the scale has
5
, the minute value flashes in
5
. In this event, skip the next to two steps.
1
for 3 seconds to switch into the time
3
.
5
to set the desired minute value.
3
to confirm your setting. Then the
2
to set the desired hour value.
3
to confirm your setting.
2
5
once to change the weight
3
to set the time.
2
to speed up
3
to speed up
3
, press the MODE button
GB
3
11
15.06.11 09:48