Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Single Control
In Single Control mode, the Maverick MK2 Wash is controlled by a single protocol input. Choose from
DMX, Art-Net™, sACN, or WDMX. In this mode, the four personalities available are: Basic (20 channels),
Standard (68 channels), Advanced (122 channels), and Tour (146 channels).
Single Control Protocol
To select the Single Control protocol, follow the instructions below:
1. Press <MENU> repeatedly until the
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Control Settings, or touch the display
where it says Control Settings.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select Single Control, or touch the display where it says Single
Control.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Use <UP> or <DOWN> to select from DMX, ArtNet, sACN, or WDMX, or touch the display where
it says the desired protocol option.
7. If using the buttons instead of the touchscreen, press <ENTER>.
Single Control Personality
To select the Single Control personality, set the Protocol, then do the following:
1. Use <UP> or <DOWN> to select Personality, or touch the display where it says Personality.
2. If using the buttons instead of the touchscreen, press <ENTER>.
3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from Basic (20-channel), Standard (68-
channel), Advanced (122-channel), or Tour (146-channel), or touch the display where it says the
desired personality.
4. If using the buttons instead of the touchscreen, press <ENTER>.
For WDMX control, ensure the antenna is raised, and there are no obstructions
between the controller and the product. See
information.
Single Control Start Address
To set the starting address of the Single Control mode, set the Protocol, then follow the instructions below:
1. Use <UP> or <DOWN> to select Start Address, or touch the display where it says Start Address.
2. If using the buttons instead of the touchscreen, press <ENTER>.
3. Enter the starting address (1–512) with one of the following methods:
•
Type the address number using the number pad that shows on the touchscreen display.
•
Using the buttons (or the button icons on the sides of the display):
a.
Use <LEFT> or <RIGHT> to select the digit to be altered.
b.
Use <UP> or <DOWN> to increase or decrease the number value of that digit.
c.
Repeat until the address is set as desired.
4. Press <ENTER>.
Single Control Universe
To set the Universe address of the Single Control mode when using Art-Net™ or sACN, set the
ArtNet or sACN, then do the following:
1. Use <UP> or <DOWN> to select Universe, or touch the display where it says Universe.
2. If using the buttons instead of the touchscreen, press <ENTER>.
3. Enter the universe address (0–254 for Art-Net™, 0–255 for sACN,) with one of the following
methods:
•
Type the address number using the number pad that shows on the touchscreen display.
•
Using the buttons (or the button icons on the sides of the display):
a.
Use <LEFT> or <RIGHT> to select the digit to be altered.
b.
Use <UP> or <DOWN> to increase or decrease the number value of that digit.
c.
Repeat until the address is set as desired.
4. Press <ENTER>.
Page 15 of 275
Home Screen
shows on the display. Press <ENTER>.
WDMX Reset
Maverick MK2 Wash User Manual Rev. 10
Operation
for troubleshooting
Protocol
to
Werbung
Inhaltsverzeichnis
