Pan/Tilt Orientation; Zoom Orientation; Display Orientation; Pan/Tilt Angle Range - Chauvet Professional Maverick MK2 Wash Schnellanleitung

Pan/Tilt Orientation

To set whether the pan or tilt orientation is normal or inverted:
1. Navigate to the Setup
2. Use <UP> or <DOWN> to select Pan Reverse or Tilt Reverse, or touch the display where it says
the desired setting.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (normal orientation) or YES (inverted
orientation), or touch the display where it says the desired option.
5. Press <ENTER>.

Zoom Orientation

To set whether the zoom goes from wide to narrow or from narrow to wide, follow the instructions below:
1. Navigate to the Setup
2. Use <UP> or <DOWN> to select Zoom Reverse, or touch the display where it says Zoom
Reverse.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (wide to narrow) or YES (narrow to
wide) or touch the display where it says the desired option.
5. Press <ENTER>.

Display Orientation

To set which way the display faces, do the following:
1. Navigate to the Setup
2. Use <UP> or <DOWN> to select Screen Reverse, or touch the display where it says Screen
Reverse.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (display is normal), YES (display is
inverted), or AUTO (the display automatically detects which way the product is facing and orients
itself accordingly), or touch the display where it says the desired option.
5. Press <ENTER>.

Pan/Tilt Angle Range

To set the range of motion the pan or tilt is permitted:
1. Navigate to the Setup
2. Use <UP> or <DOWN> to select Pan Angle or Tilt Angle, or touch the display where it says the
desired setting.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select 540 (540°), 360 or 270 (360° or 270° for pan
or tilt respectively) or 180 (180°), or touch the display where it says the desired option.
5. Press <ENTER>.

Blackout on Pan/Tilt Movement

To set whether the product will black out during pan or tilt movement, follow the instructions below:
1. Navigate to the Setup
2. Use <UP> or <DOWN> to select BL. O. P/T Move, or touch the display where it says BL. O. P/T
Move.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not black out) or YES (black out
during movement), or touch the display where it says the desired option.
5. Press <ENTER>.

Touchscreen Calibration

If the touchscreen is not responding correctly, it may need to be calibrated. To do so:
1. Navigate to the Setup
2. Use <UP> or <DOWN> to select Calibration, or touch the display where it says Calibration.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not calibrate) or YES (calibrate), or
touch the display where it says the desired option.
5. Press <ENTER>.
6. Follow the instructions, touching the points as they appear on the display.
Page 43 of 275
menu.
menu.
menu.
menu.
menu.
menu.
Maverick MK2 Wash User Manual Rev. 10
Operation