Surface Mounting; Control Panel Description - Chauvet Professional MAVERICK STORM 2 PROFILE Schnellanleitung

EN
USB Software Update
The Maverick Storm 2 Profile allows for software update through USB using the built-in USB port. To update the software
using USB flash drive, do the following:
1. Power on the fixture and plug the flash drive into the USB port.
2. Once the flash drive has been detected, the message "Upgrade Firmware" will be displayed. Press <ENTER>. If
a different message appears on the display, search for the updated software in the Menu (Updated Firmware).
A list of the updated software files will be displayed.
3. Select the file that needs to be uploaded. The message "Are you sure?" will be displayed. Press <ENTER>.
4. If the selected file is correct, the upgrade will be completed. Restart the fixture. If the selected file is incorrect, the
upgrade will fail, and the display will go back to the main interface. Repeat steps 1-3 using the correct file.
The .chl format file needs to be placed in the MAVERICK folder in the USB flash drive.
Mounting
Before mounting this product, read the
clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
trusst.com/productcategory/truss-clamps.
Mounting Diagram
Mounting
clamp (2x)
Omega
bracket (2x)
Overhead mounting

Control Panel Description

Button Name Function
<UP> Navigates upwards through the menu list or increases the numeric value when in a function
<MENU> Exits from the current menu or function
<DOWN> Navigates downwards through the menu list or decreases the numeric value when in a function
<LEFT> Navigates leftwards through the menu list
<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function
<RIGHT> Navigates rightwards through the menu list
3
QUICK REFERENCE GUIDE
Safety Notes. Use at least 2 mounting points per product. Make sure the mounting
Safety cable

Surface mounting

Maverick Storm 2 Profile QRG Rev. 1
http://