Dimmer Speed; Color Balance; Preset Select - Chauvet Professional Maverick MK2 Wash Schnellanleitung

Operation

Dimmer Speed

To set the dimmer speed, do the following:
1. Navigate to the Setup
2. Use <UP> or <DOWN> to select Dimmer Speed, or touch the display where it says Dimmer
Speed.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Smooth or Fast, or touch the display where
it says the desired option.
5. Press <ENTER>.

Color Balance

To set the maximum values of a given color in the mix, follow the instructions below:
1. Navigate to the Setup
2. Use <UP> or <DOWN> to select Color Balance, or touch the display where it says Color
Balance.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN>, to select the color value to be changed, from Red, Green, Blue, or White,
or touch the display where it says the desired option.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Set the color value with one of the following methods:
• Type the desired value using the number pad that shows on the touchscreen display.
• Use <UP>, <RIGHT>, <DOWN>, or <LEFT> to increase or decrease the value.
7. Press <ENTER>.
8. Repeat steps 4–7 until the color balance is set as desired.

Preset Select

This option saves 3 different preset menu option configurations. To record and set these presets, follow the
instructions below:
1. Navigate to the Setup
2. Use <UP> or <DOWN> to select Preset Select, or touch the display where it says Preset Select.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select the presets, from PRESET A, PRESET B,
or PRESET C, or touch the display where it says the desired option.
5. Press <ENTER>.
6. The product will reset. Any changes made to the menu options will be saved to this preset.
• Default is PRESET A. If you make changes inside PRESET A, those changes are
saved to PRESET A without having to do anything.
• To create a new preset, highlight and select PRESET SELECT. Highlight
PRESET B or PRESET C and press <ENTER>. When you make that selection,
the product will reset automatically. Go back and make the changes you need to
make in the menu. This will automatically save to the preset you are in.
Maverick MK2 Wash User Manual Rev. 10
menu.
menu.
menu.
Page 46 of 275