Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INTRODUCTION
CONGRATULATIONS...
...you are now the proud owner of an SWR California Blonde acoustic instrument amplifier! Please read this entire manual carefully so
that you can fully realize the potential of the California Blonde.
MADE IN THE U.S.A.!
SWR amplification is handmade and individually tested in the United States. Everyone at SWR sincerely hopes that you are satisfied
with your recent purchase, as we are extremely proud of the quality and attention that goes into each and every SWR product. We
truly hope that your purchase of an SWR helps bring out the best in your playing and adds to your enjoyment of music.
Thanks for choosing SWR!
The amplifier packaging should include the following items:
(1) Owner's Manual
(1) AC Power Cord
(1) Warranty/Product Registration Form
CALIFORNIA BLONDE SPECIFICATIONS
POWER OUTPUT
120 Watts @ 8 ohms (internal speaker only)
160 Watts @ 4 ohms (using an 8 ohm extension speaker)
SPEAKERS
1- 12" stamped frame woofer, 200 watts, 8 ohm impedance
1- high frequency supertweeter, 25 watts, 16 ohms (crossover point fixed at 4kHz)
FREQUENCY RESPONSE
30Hz to 16kHz.
CABINET
Made from a combination of plywood and particle board. Interlocking dado and rabbet joints, glued and nailed. Covered in a
"sandstone" vinyl covering. Metal corners. Comes with our "Texas Bar Proof" powdercoated speaker grill. Front slot port located at
bottom.
One top strap handle and one spring loaded handle on the bottom. For better monitoring, tilt the cabinet back and extend the bottom
handle. Then lower the cabinet down, resting it on the rubber handle.
DIMENSIONS:
24" H x 14.5" W x 14.5" D
WEIGHT: 50 lbs.
FRONT PANEL FEATURES
• Instrument Input Jack
• Stereo Input Jack
• Tuner Out Jack
• Balanced Mic Input Jack
6 • CALIFORNIA BLONDE
Werbung
Inhaltsverzeichnis
