Assembling The Kubbe Attachment; Assembling The Biscuit Attachments - Silvercrest SFW 350 D2 Bedienungsanleitung

Assembling the kubbe attachment

Unfold the fold-out side. There you will find the step-by-step illustrations for as-
sembling the appliance.
1) Remove the meat grinder casing
meat grinder".
2) Disassemble any attachments that might be fitted and clean the meat grinder
casing
NOTICE
► To use the kubbe attachment
nor a cutting or sausage disc
meat grinder casing
3) Coat all metal parts with cooking oil.
4) Insert the two plastic parts of the kubbe attachment
the bottom kubbe attachment
grinder casing
5) When everything has been attached correctly, screw the ring clamp
on hand-tight.
6) Assemble the meat grinder casing
meat grinder".

Assembling the biscuit attachments

Unfold the fold-out side. There you will find the step-by-step illustrations for as-
sembling the appliance.
1) Remove the meat grinder casing
meat grinder".
2) Disassemble any attachments that might be fitted and clean the meat grinder
casing
NOTICE
► To use the biscuit attachment
nor a cutting or sausage disc
meat grinder casing
3) Coat all metal parts with cooking oil.
4) Pull the pattern strips
5) First place the plastic disc and then the metal disc of the biscuit attachment
into the meat grinder casing
ment
openings in the meat grinder casing
6) After everything has been correctly assembled, screw the ring clamp
back on hand-tight.
│ GB │ IE
■ 28
.
if necessary.
.
.
if necessary.
away from the front of the biscuit attachment
. so that the fixings on the biscuit attachment
as described under "Assembling the
, neither the cross blade
/ are required! Remove these from the
ring are located in the openings in the meat
as described under "Assembling the
as described under "Assembling the
, neither the cross blade
/ are required! Remove these from the
(see fold-out side). Insert the biscuit attach-
.
with the spring ,
so that the fixings on
back
with the spring ,
.
. are located in the
SFW 350 D2