Boiling The Water - Silvercrest SWKD 2400 A1 Bedienungsanleitung Und Serviceinformationen

SilverCrest SWKD 2400 A1

7.1. Boiling the water

DANGER of electric shock
Keep the base (5) away from water. There is danger of electric shock.
WARNING
Boil the water and pour it away twice before you use the kettle for the first time
(see the previous section on 'Initial use').
WARNING
Always use fresh drinking water. Do not drink water that has been in the pot (3)
for longer than an hour. Do not reheat water that has cooled down. Always
pour away old water. Otherwise germs may form.
Water should not be kept in the pot for longer than an hour, especially when
you are using the keep-warm function at low temperatures, since there is a high
risk of germs forming at these temperatures.
Cable rewind
An integrated cable rewind is located
on the underside of the base (5). You
can adapt the length of the power
cable (6) to the conditions at the
location in which you are using the
kettle.
You can minimise the length of the
cable when you are not using the
kettle.

Unwind the power cable (6) on the underside of the base (5).

Place the base (5) on a flat, non-slip and dry surface. Make sure that the power cable (6)
passes through the opening on the underside of the base (5). This is to ensure that the kettle is
positioned securely.
WARNING
If the power cable (6) does not pass through the opening on the underside of
the base (5), the base (5) and pot (3) are not positioned securely. The
movement of the boiling water can make the kettle tip over and cause serious
damage to property and cause injuries!

Open the lid (13) by pressing the lid release button (1).
12 - English