Identification Of Warnings; General Points; Intended Use - SFA SANIPUMP Betriebs-/Montageanleitung

The SANIPUMP pumping station is fitted with blades.
®
It is not permitted to handle it when it is switched on to prevent personal injury
and damage to property.
When it is switched off, it must be handled with caution.

1.1 Identification of warnings

Danger
This term defines a high risk of danger, which can lead to death or serious
injury, if not avoided.
Warning
This term defines a hazard which could cause a risk to the machine and its
WARNING
operation, if it is not taken into account
Dangerous area
This symbol, in combination with a keyword, characterises hazards that could
lead to death or injury.
Dangerous voltage
This symbol, in combination with a keyword, characterises dangers associated
with the voltage and provides information on voltage protection.
Property damage
This symbol, in combination with the keyword ATTENTION, characterises
dangers to the machine and its proper operation.

1.2 General points

This operating and installation manual contains important instructions to follow for the fitting,
operation and maintenance of the SANIPUMP
guarantees safe operation and prevents injury and property damage.
Please follow the safety instructions in every section.
Before fitting and commissioning the pumping station, qualified staff/the operator concerned must
read and understand all these instructions.

1.3 Intended use

Only use the pumping station in the fields of application described in this documentation.
• The pumping station must only be operated in technically perfect condition.
• The pumping station must only pump the fluids described in this documentation.
• The pumping station must never operate without pumped fluid.
• Never exceed the usage limits defined in the documentation.
• The safe use of the pumping station can only be ensured when its use is compliant (as described
in this manual).
pumping station. Following these instructions
®
19