Mastervolt ChargeMaster 12/15-2 Betriebsanleitung Seite 11

CHARGEMASTER 12/15-2
General
Model
Article number
Operating temperature
Storage temperature
Protection degree
Noise level
Safety class
Dimensions ( HxWxD )
Input
Input voltage
Input frequency
Input current
Maximum input power
Power factor cos phi
Efficiency at full power
No load consumption
AC input fuse
AC connector
Length AC cable
Output
Voltage (DC) absorption
Voltage (DC) float (gel/AGM)
Voltage (DC) force float
Return amps
Adjustment range (DC)
Adjustment method
Number of outputs
Max. output current (bulk)
Charge Characteristic
Battery types
DC-cables
Safety devices
Short circuit protection
Reverse polarity protection
DC fuse
Temperature protection
Power and fault indicator
Indicator
Correct operation
Compliance
CE
ChargeMaster 12/15-2
43011500
0 °C to 40 °C (derating of 2% / °C >40°C)
-20 °C to 70 °C
IP21 (horizontally mounted), IP20 (vertically mounted)
Not audible (<30 dBA)
Class I
206 x 121 x 50mm
230 Vac +/- 10%
50/60 Hz +/- 10%
1,2A
212 Watt
> 0.95
> 85 %
< 15 Watt
1,6A slow blow (non replaceable)
Class I plug
120 cm
14.25 V ( 6 Hr )
13.25 V ( 13.8 V )
13.8 V
< 1.9A (15min) (1/8 Imax)
12 V – 15 V
Software setting by Quasi RS232 (TTL levels)
2
15 A
Three-step, fully automated, IUoUo (acc. DIN 41772), programmable
Open and sealed lead acid batteries
3 x 2,5mm² x 125 cm
Yes, reduced output, max. 7A
Yes, by DC fuse
20 Amps (yellow), standard automotive blade fuse
Yes, by derating the output and shut off at 50°C
Green LED
Green, flashing (bulk / Absorption) or continuously (Float )
Yes
SPECIFICATIONS
Figure 3 – Abbildung 3 –
Figuur 3 – Figura 3
Charge characteristic
11