Error Messages - Laserliner Coatingtest-Master Bedienungsanleitung

Error messages

15
Error code
Err1, Err2, Err3
Err 1
Err 2
Err 3
Err 4, Err 5, Err 6
Err 7
!
If errors consistently recur, please contact your specialist dealer or the
Laserliner service personnel.
USB data transfer
16
With the software provided on the CD it is possible to transfer the recorded
data to a PC and to use the data for further processing and documentation.
Load the CD in the drive and follow the installation routine. After successful
installation, start the application. Connect one end of the supplied USB cable
to the mini-USB port of the device and the other end to a free USB port on
your computer.
For further information on how to use the software, refer to the software
manual on the DVD that contains a detailed description of the functions.
24
GB
Description
Sensor not connected properly.
Deviating signal.
Error in eddy current sensor
Error in magnetic induction sensor
Error in both sensors
reserved
Error in coating thickness
1.
2.
3.