LaserLiner CoatingTest-Master Bedienungsanleitung Seite 16

Options
4
Measuring mode
Individual mode: each measurement is con rmed
Measure
by an acoustic signal and stored temporarily.
mode
Permanent mode: continuous measuring and
storing
Working mode
Direct: for quick measurements. Can save 80
measurements. However, the measurements are
deleted when the device is turned off or swit-
ched to group mode.
Working
Group 1-4: for speci c series of measurements
mode
A total of 80 measurements can be saved per
group. Individual adjustment of calibration and
limits per group.
Used probe
Auto: Automatic sensor adjustment
Used
Fe: Magnetic induction principle
probe
No Fe: Eddy current principle
Units
μm, mils, mm
Unit
setting
16
GB