Reset To Factory Settings - Laserliner Coatingtest-Master Bedienungsanleitung

Reset to factory settings

13
The measuring device can be reset to factory settings
to delete all measurements, settings and calibration
values. To do so, follow these steps:
1. Switch off measuring device
2. Press the keys "ON/OFF" and "ZERO" at the same
time.
3. Let go of the "ON/OFF" key and keep "ZERO"
pressed.
4. After starting, con rm the reset by responding
either "Yes" or "No" to the prompt.
Average / Standard deviation
14
For several measurements, the average
the standard deviation (Sdev) gauges the average deviation of the individual
measurements from this average value. More signi cant standard deviations
indicate a more scattered series of measurements.
For normal measurement distributions,
68% of the measurements are within
95% of the measurements are within
99% of the measurements are within
CoatingTest-Master
_
x indicates the average value, while
_
x ± (1*Sdev),
_
x ± (2*Sdev),
_
x ± (3*Sdev)
23
GB