Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Item
1
2
3
4
Then proceed as follows:
1. Unscrew the star knob screw (pos. 2) until the dust collector comes loose (pos. 1).
2. Pull the underside of the dust collector (pos. 1) out sufficiently far that it can be pulled
down.
3. Close the opening on the dust collector (pos. 1) with the enclosed sticker
(Pos. 3) located on the dust collector (pos. 1).
4. Insert a new dust collector in reverse order. Make sure that the seal (pos. 4) on the dust
collection container (pos. 1) is not damaged and that the dust collection container (pos.
1) is held firmly. The dust collector (pos. 1) and its seal (pos. 4) must both rest firmly on
the sealing surface of the product.
1502649-00
Description
Dust collection container
Star grip screw with washer
Sticker (enclosed)
Seal
Tab. 31: Positions on product
- 96 -
EN
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
