6. In the next step, remove the hose clamps from the compressed air hose (pos. 5) and PU
hose (pos. 6) and put them to one side. For further assembly, place the hoses at the
side of the filter housing (pos. 7).
7. Loosen the screws and sealing washers (pos. 8 and 9) from the filter holder (pos. 10)
and put them to one side.
8. Carefully lift the filter seat (pos. 10) together with the filter cartridge (pos. 15) out of the
filter housing (pos. 7).
1502649-00
Fig. 41: Main filter change - Filter intake
- 104 -
EN