Kemper VacuFil 125 Betriebsanleitung Seite 105

9. Slowly ease the filter cartridges (pos. 15) into the garbage bag enclosed with the
replacement filter.
10. Loosen the hexagonal nut (pos. 13) on the underside of the filter and let it drop into the
garbage bag with the spring and sealing washer (pos. 11 and 12).
11. If necessary, clean up the workplace (see Maintenance section).
12. Then connect the replacement filter using the threaded rod and secure it with the
hexagonal nut, spring and sealing washer supplied with the replacement filter (pos. 11
to 13). Make sure that the seal (pos. 14) on the upper side of the filter cartridge
(Pos. 15) fits tightly all around the filter holder (pos. 10).
13. Perform steps 1-7 in reverse order. Make sure that all the gaskets and clamps are
properly fastened and that they will function correctly.
1502649-00
Fig. 42: Carrying out main filter replacement
- 105 -
EN