The product can be used in manual or automatic mode.
By pressing the "Manual / Automatic field" (pos. 15) you can switch between both
modes.
In manual mode, the suction power can be adjusted via the adjustment fields (pos. 17 and
18).
In automatic mode, you can press the "Selection of the welding fume extraction burner
field" (pos. 5) to select between various welding fume extraction burners from various
manufacturers.
NOTE
In manual operation there is not sufficient suction power to collect the pollutants in the
welding fume extraction burner!
If the product is being operated in "start-stop mode", a message appears in the touch
display under the "Switch-on and switch-off behavior." (pos. 11)
1502649-00
- 86 -
EN