WAGNER WallPerfectW 995 Originalbetriebsanleitung Seite 37

WallPerfect W 995 WallPerfect W 995
•
Click the spray lance into the holder and slew it
over the container with water. (Fig. 9)
Attention! During automatic
cleaning of the pump do not
leave the device unattended. The
hoses could disconnect during
the cleaning operation leading to
water damage.
•
Set the multifunction switch to "FILL/CLEAN".
•
Pull the trigger (ig. 10, 1) and push the stop (2)
upwards to secure the trigger. Allow water to
circulate through the machine for about 10 minutes
in order to clean the pump and hoses. If necessary
renew the water.
•
Release the stop by pulling the trigger.
•
Turn the machine of. (Set the multifunction switch
to "OFF")
•
Take the spray lance out of the holder and remove
the cover (ig. 11, 1) from the spray head.
•
Detach the material hose (ig. 11, 2) from the slot
on the spray head.


1

1
GB D
2
2
35 35