Klarstein Beretta Bedienungsanleitung Seite 24

EN
24
CONTROL PANEL AND FUNCTION KEYS
Low Mid
After plugging in the mains plug, the indicator light comes on. All outlets
1 are closed and the cooker hood switches to standby mode. If there is no
operation, the indicator light goes out automatically.
Switch on: Press the POWER button once to switch on the cooker hood.
The indicator light will turn on and the cooker hood will run at low speed.
The button lights up. If you press the POWER button again to turn it off, the
button will stop lighting. All functions are then deactivated and the cooker
2 hood switches to standby mode. The power buttons and the LIGHT button
work independently of each other and function independently of the POWER
button. If you press any of the function buttons once, the cooker hood will run
at the appropriate power. If you now press the POWER button, all functions
will be stopped.
If you press the LIGHT button once, the cooker hood light is turned on. The
indicator light for the LIGHT button and POWER button will turn on. When you
3
press the light button again, the light is turned off again. The indicator lights
will then go out again.
If you press the HIGH button once, the cooker hood will run at maximum
power. The HOCH button and POWER button indicator lights will illuminate.
4
If you press the button again, the cooker hood will stop operating and the
indicator lights will turn off.
If you press the MEDIUM button once, the cooker hood will run at maximum
power. The indicator light for the CENTER button and POWER button will turn
5
on. If you press the button again, the cooker hood will stop operating and the
indicator lights will turn off.
If you press the LOW button once, the cooker hood will run at maximum
power. The indicator light for the LOW button and the POWER button will turn
6
on. If you press the button again, the cooker hood will stop operating and the
indicator lights will turn off.
The LOW, MEDIUM and HIGH power levels cannot be set at the same time,
only one power level can be selected at a time. For example, if the average
7
power level is set and you press the button, the unit will switch to the low
power level, etc., and the power level will be set to the same value.
High Light Power