Random Playback; Track Sampling; Programming Function - TechniSat DIGITRADIO 360 CD IR Bedienungsanleitung

13.7 Random playback

With the random generator, the CD tracks can be played back in a randomly mixed order.
> If, during playback, you press the RANDOM button on the remote control (22), the random playback
symbol appears on the display (4).
> To switch the function off again, press the RANDOM button (22) again.

13.8 Track sampling

This function enables the first 10 seconds of the tracks to be sampled.
> Press the INTRO button (21) on your remote control to start/end the function. The selected mode is
shown on the display (4).

13.9 Programming function

With the programming function, you can play up to 32 tracks on a music CD or 64 tracks on an MP3/WMA-CD
in an order determined by you.
You can only carry out programming if there is a disc in the closed CD compartment and the device is in
stop mode.
> Access the stop function by pressing the < button on the remote control (13) or on the device (6).
> Press the PRESET button on the remote control (18)
For a normal audio CD, the display (4) shows PRG; the track number "T01" flashes, as does the memory slot
P01.
> Use the TUNING r/8: and TUNING s/97(9, 10) buttons on the device or the 97 or 8: buttons
on the remote control (14, 32) to select the first track to be programmed.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
49