Set-Up Wizard - TechniSat DIGITRADIO 360 CD IR Bedienungsanleitung

If a software update has been located, follow the instructions on the display (4).
In order to find and upload software updates, the radio must be connected to the Internet.
Do not switch the DIGITRADIO off during the update process.

15.7 Set-up wizard

> Go to MENU > Main menu > System settings > Set-up wizard to run the set-up wizard again.
When switching on for the first time, the set-up wizard starts automatically.
> As soon as Run now is shown on the display (4) select YES.
If you select No, the wizard closes and you must perform the required settings manually.
You will be taken through the settings in various steps.
> In Time format, you can choose whether the time is to be shown in 12 or 24 hour format.
> In the next step you can select the source via which the time is to be synchronised; DAB (DAB update),
FM (FM update) or Internet (NET update), or whether No update should take place. For more
information see Section 15.3.2.
If you have selected NET update, in the next steps you must select the Time zone where you are
located as well as whether it is currently Summertime (YES) or not (NO).
If you select No update you must then set the time and date manually.
> Now select whether the network connection should remain active on standby (YES) or not (NO).
EN
FR
IT
NL
NW
DK
PL
CZ
SK
61