Retrieving Displays - TechniSat DIGITRADIO 360 CD IR Bedienungsanleitung

4.4.3 Adjusting the volume
> Adjust the volume using the VOLUME -/+ buttons (8, 26) on the remote control or by rotating the SELECT/
VOLUME knob (5) on the device. The set volume is shown on the display (4).
4.4.4 Switching to mute
> You can switch off the sound by pressing the MUTE button (33) on the remote control.
This mode is indicated on the status bar by a corresponding symbol.
> The sound is switched back on by pressing the MUTE button (33) again on the remote control.

4.4.5 Retrieving displays

> By repeatedly pressing the INFO button (34) on the remote control or on the device (3) (in this case the
INFO button must not be released for approx. 2 sec.) while a source is being played, you can display and
scroll through the following information:
DAB mode:
DLS: continuous text with additional information, station
Genre
Ensemble/multiplex (group name) frequency, channel
Signal intensity
Signal error rate bit rate in kbps sound format
Date
Track, artist
28
FM mode:
RT radio text (if broadcast)
PTY - Programme type
Frequency
Date