Other Functions; Sleep Function; Alarm; Setting The Alarm Time - TechniSat DIGITRADIO 360 CD IR Bedienungsanleitung

14 Other functions

14.1 Sleep function

> You can set the sleep function using MENU > Main menu > Sleep.
> Using the r/s PRESET buttons on the remote control (7, 9), or by rotating SELECT/VOLUME on the
device (5), you can set the period in steps of 15, 30, 45 and 60 minutes after which the device switches to
standby, or you can switch the Sleep function off again by selecting Sleep off.
> Confirm your selection with the ENTER button on the remote control (27) or by pressing the SELECT/
VOLUME knob on the device (5).
Alternatively:
> Press the SLEEP button on the remote control (16) as often as required until the desired value is shown on
the display (4).
When the sleep function is active, a clock symbol appears on the status bar on the display with the
remaining time until the DIGITRADIO switches to standby.

14.2 Alarm

> Using MENU > Main menu> Alarm you can retrieve the alarm settings.
Alternatively:
> Press the TIMER button on the remote control (20), to access the alarm settings directly.

14.2.1 Setting the alarm time

The alarm function cannot be used until the correct time has been set. Depending on the set-up, this
either occurs automatically or has to be set manually.
52