Cd/Mp3 Player; General Information On Cds/Mp3 Cds - TechniSat DIGITRADIO 360 CD IR Bedienungsanleitung

> Connect the external device to the AUDIO IN connection (3.5 mm jack) on the DIGITRADIO.
> Select the 5.2 AUX IN source as described in Section.
For optimum volume setting, use the volume control on the radio as well as the one on the connected
device.
Take into account that, when the volume setting is very low on the connected device and the volume
setting on the radio is higher, irritating noises/murmurs are amplified accordingly and can be heard
more clearly. It is recommended that the volume on the DIGITRADIO e.g. on a DAB+ or FM station, is set
and switched to audio input, and then the volume on the connected device is adjusted in such a way
that the overall volume of the audio input corresponds approximately to the volume of the DAB+/FM
station. In this way you can also avoid considerable volume differences when switching between the
functions on the DIGITRADIO.

13 CD/MP3 player

13.1 General information on CDs/MP3 CDs

The device is designed for music CDs that are played with audio data (CD-DA or MP3 for CD-R and CD-RW).
MP3 formats must be created with ISO 9660 Level 1 or Level 2. Multi-session CDs cannot be read. In MP3
mode, the terms "Folder" = Album and "Track" are critical. "Album" corresponds to the folder on the PC, "track"
to the PC file or a CD-DA track.
The device sorts the albums or the tracks on an album into alphabetical order by name. If you prefer a different
order, change the name of the track or album and place a number in front of the name.
When burning a CD-R and CD-RW with audio data, various problems can arise which could occasionally
compromise smooth playback. This is caused by faulty software and hardware settings or a blank disc being
used. Should such errors arise, you should contact your CD burner/burner software manufacturer or search for
the relevant information, e.g. on the Internet.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
45