Data Bit Description - CS Instruments DS 400 Installation Und Betriebsanleitung

8.8

Data Bit description

*1) Data Value
*2) Data Status
Write 1 to these bits
clears Status
*3) Sensor Type
*4) Channel Name
*5) Value description
DS 400
Format (Dword / Float) depends on Value Description Bit 15
Position of Dezimal Point depends on Value Descrition Bit
14..12
Bit 15
Bit 14
Bit 13
Bit 12
Bit 11
Bit 10
Bit 9
Bit 8
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Bit 15..8
Bit 7..0
Name coding in UTF8 (max 24 Byte)
Bit 15
Bit 14..12
Bit 11..7
Bit 6..0
Sensor changed
Sensor setting changed
Sensor Alarm settings changed
Sensor name changed
Lower Alarm active
Lower Warning active
Upper Alarm active
Upper Warning active
tbd
Channel Error
Value Error
out of range
Stopped
UVP status
OCP status
Channel Disconnected
Sensor Basic type
Sensor Subtype
1 = Dword , 0 = float
position of dezimal point
index of value name
index of unit name
see below *5)
see below *5)
different sensor
mayor parameter
changed
Alarm settings changed
minor change
Value status
Value status
Value status
Value status
Value status
Value status
Value status
Value status
0..255 0 = no sensor
0..255
0,1
0..7
0..31
0..127 0 = value not used
Side 30 of 36