System Information - Jung Smart Visu Server Produktdokumentation

6.6 System information

The Smart Visu Server is used to visualise and operate a KNX system connected to the
same network via a smartphone, tablet, laptop or PC and to control Philips Hue systems
(SV-Home). A local network is required for it to function.
The connection to the KNX is made via the KNX IP interface. The connection to the Philips
Hue system is made via the Philips Hue Bridge.
Start-up takes place via the web-based interface (SV-Control). The technical
documentation is also available here.
The server organises KNX functions and Philips Hue operation into areas, functions and
actions.
Areas: An area indicates an assignment, e.g. to a room. Up to 24 areas are possible.
Function: A function corresponds to, for example, a KNX function, thus possibly
comprising multiple group addresses, e.g. switching channel with feedback. A
function could also be the link to a Philips Hue lamp. Up to 240 functions can
be created with up to 1200 datapoints. Each function can be assigned to one
or more areas.
Action: An action is a grouping of one or more functions. Actions can be triggered by
events, by time or via user-defined controls.
KNX projects can be imported from the OPC export (3-level group address) of ETS3,
ETS4 or ETS5 or be created manually.
SV- SERVER / SV-SERVER-INT
67 / 150