Editing Or Deleting A Function - Jung Smart Visu Server Produktdokumentation

7.4.8 Editing or deleting a function

Access as Administrator or User
The "User" and the "Administrator" have different access rights to KNX functions within the
"Functions" column.
You require Administrator rights to be able to edit and delete all the functions.
Access as Administrator
Select an existing function (1) to edit or delete it. The "Functions" column lists all the
existing functions.
The arrow buttons " " (2) allow you to change the order of the functions and thus the
position in SV-Home. The top most function in SV-Control (from top to bottom) is also
displayed as the first function in SV-Home (from top to bottom).
It is possible to change the effect of the selected function (3), assign an alternative icon by
pressing the currently selected icon " " (4), edit the name of the function (5) and, beneath
that, add a description (6).
To save the change, then press the " " button (7). The most recently saved properties can
be restored by pressing the " " button (8).
To fully delete the selected area (assuming Administrator rights), press the " " button (9).
Deletion of an area does not delete the functions assigned to it.
7 8 9
2
4
5
6
1
3
Figure 97: Organisation of the "Areas & Functions" tab
SV- SERVER / SV-SERVER-INT
113 / 150