Structure Of The Device, Function - Jung Smart Visu Server Produktdokumentation

6.5 Structure of the device, function

(1) USB interface
(2) Ethernet interface
(3) Power supply
(4) Status LED
(5) Reset button
(6) Discharge protection
The Status LED (4) displays the various operating statuses.
Colour of the Status LED
Flashing yellow
Flashing red
Continuous yellow
Continuous blue
Continuous green
Flashing blue/magenta
Flashing green/magenta
The Reset button (5) triggers a reset or an update.
Reset network settings, DHCP
operation active
Factory reset
Initialise update operation
SV- SERVER / SV-SERVER-INT
Figure 56: Structure of the Smart Visu Server
For software updates and data backup
For connection to the local network
Only the power supply unit from the scope of delivery
Displays the current status of the server
Reset and update
Remove for operation
Function
Server booting
Error pending, server stopping
Server and network booting
Server ready, DHCP active
Server ready, static network address
Update operation, DHCP active
Update operation, static network address
Press the button ≥ 5 seconds, LED flashes yellow, press the
button again briefly
Press the button for 20 seconds, LED flashes red, press the
button again briefly
Press the button briefly 5x
- LED turns magenta: No update available - LED flashes
magenta: Update operation
66 / 150