Inhaltsverzeichnis
Werbung
Open the steam / hot water draw-off tap (Fig. 13) to draw off steam.
STEAM
Ignoring the CLOSE TAP display message, draw off steam until the
receptacle containing JURA Cappuccino Cleaner is empty.
The Professional Cappuccino Frother and the milk pipe are cleaned.
Close the steam / hot water draw-off tap.
READY
The machine is ready to prepare steam for around 40 sec., then
the machine is reset so that it is ready to brew coffee.
Fill the receptacle with 2.5 dl of fresh water.
Immerse the milk pipe in the receptacle containing fresh water.
When READY appears on the
selection button
(8) again to ready the machine to prepare
steam.
Open the steam / hot water draw-off tap (Fig. 13) to draw off steam.
Ignoring the CLOSE TAP display message, draw off steam until
the receptacle containing fresh water is empty. Then close the
steam / hot water draw-off tap (14).
The Professional Cappuccino Frother (15) and the milk pipe are
rinsed with fresh water.
Cleaning of the Professional Cappuccino Frother is complete, your
IMPRESSA is ready for use.
14. Switching off the IMPRESSA
Switch the IMPRESSA off with the On/Off button
Automatic switch-off rinse is started.
15. Programming
, press the steam pre-
You can program the following settings:
RINSE
BUTTONS
FILTER –
HARDNESS
ENERGY –
OFF AFTER
RINSING
RESET
INFO
DISPLAY
LANGUAGE
READY
RINSING
Just one automatic rinse is started if at least 1 speciality coffee
has been prepared. Otherwise the machine switches off with-
out a rinse.
The IMPRESSA is configured in the factory such that you can
prepare coffee without any additional programming. You can
individually program various settings to adapt your beverages
to your personal taste.
(21).
E
17
Werbung
Inhaltsverzeichnis
