Inhaltsverzeichnis
Werbung
15.1 Buttons programme item
With the
BUTTONS programme item you can enter
individual settings for all speciality coffees, milk and hot water.
Permanent settings in programming mode always follow the
same model.
The following permanent settings can be made for speciality coffees,
milk and hot water:
Product
Amount of water Strength
1 espresso 25 ML – 240 ML MILD, NORMAL, STRONG, XSTRONG NORMAL, HIGH
2 espressi
25 ML – 240 ML
1 coffee
25 ML – 240 ML MILD, NORMAL, STRONG, XSTRONG NORMAL, HIGH
2 coffees
25 ML – 240 ML
Milk
3 – 120 SEC
Hot water 25 ML – 450 ML
For example:
Proceed as follows to change the amount of water for a coffee from
100 ML to 110 ML, to change the strength from NORMAL to STRONG
and the temperature from NORMAL to HIGH.
Press the Rotary Switch (1) until the following message appears on
the display:
RINSE
Turn the Rotary Switch (1) again until the following message ap-
pears on the display:
BUTTONS
Press the Rotary Switch (1).
SELECT
BUTTON
Press the preparation button for the speciality coffee for which you
want to adjust the amount of water. For example, 1 COFFEE.
Press the Rotary Switch (1).
For example
Turn the Rotary Switch (1) to adjust the amount of water as desired.
For example
Press the Rotary Switch (1) to save the new amount of water.
Temperature
NORMAL, HIGH
Turn the Rotary Switch (1) further until the next sub-item appears
NORMAL, HIGH
on the display:
Press the Rotary Switch (1).
Turn the Rotary Switch (1) until the following message appears on
the display:
Press the Rotary Switch (1) to save the change.
Turn the Rotary Switch (1) further until TEMPERATURE appears on
the display.
Press the Rotary Switch (1).
WATER
100 ML.
110 ML.
OK
WATER
STRENGTH
NORMAL
STRONG
OK
STRENGTH
NORMAL
E
19
Werbung
Inhaltsverzeichnis
