Distance Measurement; Touchscreen; Power Source - Hilti PD-C Original Bedienungsanleitung

4 Technical data

4.1 Distance measurement

Note
Distance and inclination measurement accuracy: Influences such as,
in particular, high temperature fluctuations, dampness, shock, dropping,
etc. can affect the accuracy of the tool. Unless stated otherwise, the
tool was adjusted or calibrated under standard ambient conditions (MIL-
STD-810G). As a basic principle, when taking distance measurements
an additional distance-dependent error of 0.02 mm per meter is to be
taken into account. The reference for inclination measurements is the
underside of the tool.
Operating modes
Distance measurement accuracy
(2σ, standard deviation)
Inclination measurement accu-
racy (2σ, standard deviation)
Beam divergence
Measuring range with target plate 0 m ... 200 m
Target camera maximum resolu-
tion [megapixels]

4.2 Touchscreen

Indicators
Touchscreen diagonal size

4.3 Power source

Li­ion battery
Rated voltage
Capacity
Standby time
Battery life (depending on use)
AC adapter voltage output
• Single measurements
• Range (multiple) measurements
±10 mm
±0.3°
0.20 mrad ... 0.45 mrad
(0 ft ... 656 ft)
5.0
Continuous display of distance,
operating status and battery charge
status
10.16 cm
(4.00 in)
Built-in
3.7 V
3,220 mAh
> 200 h
> 10 h
5 V
21