Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Notes; Correct Use; Transport, Storage And Packaging; Transport Inspection - oventrop Regusol Einbau- Und Betriebsanleitung Für Fachpersonal

Dn 20 übergabestation
Vorschau ausblenden Andere Handbücher für Regusol:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

2 Safety notes

2.1 Correct use

Safety in operation is only guaranteed if the
transmission station "Regusol" is used correctly.
The transmission station "Regusol" is designed for
the connection of the storage cylinder to the
collector.
Any use of the solar station outside the above
applications will be considered as non-compliant
and misuse.
Claims of any kind against the manufacturer and/or
his authorised representatives due to damages
caused by incorrect use cannot be accepted.
The observance of the installation and operating
instructions is part of the compliance terms
2.2 Possible dangers at the installation location
and during transport
The case of an external fire has not been taken into
consideration when constructing the transmission
station "Regusol".
!
WARNING
Heavy station!
Risk of injury! Suitable transport and lifting
devices are to be used. Wear suitable protective
clothing (e.g. safety shoes) during installation
and use safety devices. External components
like handwheels or pressure test points must
not be misused for the absorption of external
forces, e.g. as connection point for lever tools
etc.
Hot surfaces!
Risk of injury! Do not touch without safety
gloves. The solar station and the pipework may
get very hot during operation. Wear safety
gloves and deactivate the installation before
work commences when system temperatures
are high.
Sharp edges
Risk of injury! Only touch with safety gloves.
Threads, bore holes and edges are sharp.
Small components!
Risk of ingestion! Store and install the
components of the solar station out of reach of
children.
Allergies!
Health hazard! Do not touch the solar station
and avoid any contact if allergies against the
used materials are known.
!
DANGER
Danger to life in case of inadequate
qualification!
Improper installation may lead to extensive
injuries to persons and damage to property.
For this reason:
Installation, initial operation, maintenance and
repair must only be carried out by qualified
tradesmen.
(VDE, EN 12975 & DIN 4807)
2.3 Installation, initial operation and maintenance
Installation, initial operation, maintenance and repairs
must only be carried out by authorised and qualified
tradesmen (specialist heating company / authorised
.
company).
(VDE, EN 12975 & DIN 4807).
3 Transport, storage and
packaging

3.1 Transport inspection

Upon receipt check delivery for any damages caused
during transit and for completeness.
Any damage must be reported immediately upon
receipt.
3.2 Storage
The transmission station "Regusol" must only be
stored under the following conditions:
– Do not store in open air, keep dry and free from
dust.
– Do not expose to aggressive fluids or heat sources.
– Protect from direct sunlight and mechanical
agitation.
– Storage temperature: –20 °C up to +60 °C
– Max. relative humidity of air: 95 %
3.3 Packaging
Packaging material is to be disposed of in an
environmentally friendly manner.
7

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Regusol lh-130Regusol sh-130

Inhaltsverzeichnis