Radiodetection RD7000+ Bedienungsanleitung Seite 10

5. Press the key to enter the PAIR menu.
6. Scroll up or down to the BT-PC option.
7. Press the key and the locator will attempt to pair with your PDA.
On your PDA:
8. From the PDA's Start menu, select Settings then select the Connections Tab
followed by the Bluetooth icon.
9. Ensure the Bluetooth radio is switched on and make the PDA visible to other devices.
10. Select the Devices tab and scan for new partnerships.
11. Create a partnership with the RD7M_xxx device.
12. If asked for a passkey, enter 1234.
13. Select the COM Ports tab and make a New Outgoing Port with the RD7000+
locator. Note the port number of the selected COM port.
Troubleshooting
Successful wireless communication depends on a number of factors including:
battery life, electromagnetic interference, device memory and physical obstructions.
Ensure that the RD7000+ locator and any other wireless device is sufficiently charged
for wireless communication. Note that many PDAs will suspend wireless connections
when their battery capacity drops below a threshold percentage. Consult your device's
documentation for more information.
Excessive electromagnetic interference can effectively limit the range of wireless
communication and / or corrupt data.
Your PDA device may have insufficient memory to maintain a wireless link, particularly if
the connection is sustained over an hour or longer. Make sure you quit applications on
your PDA using the method described in your device's documentation.
Resetting connections
If you experience problems with the RD7000+ wireless Bluetooth technology features,
Radiodetection recommends resetting the connection and then pairing your device again:
1. Press the key to enter the menu.
2. Scroll to the BT menu using the or
3. Press the key to enter the BT menu.
4. Scroll up or down to the RESET menu.
5. Press the key and the locator will purge all current connections.
6. Re-pair your devices.
keys.
18
Bluetooth error codes
If an error occurs when attempting to perform any Bluetooth command using the locator
to the transmitter or the locator to a PC or PDA, the LCD will display a code to help you
resolve the problem on the locator.
The codes are as follows:
BT C OD E D E S C R I PTI ON
BT001 Bluetooth not configured for this unit
BT002 Internal Bluetooth error
BT004 Locator not paired with PC/PDA
BT005 Paired but connection attempt failed. Power cycling may be required
Survey Measurements
The RD7000+ locator models can transmit survey measurements to a paired Pocket PC
(or PDA) with GPS, running a compatible application such as SurveyCERT.
Saving measurements
To save survey measurements, press the
To achieve accurate results the locator must be kept as still as possible during the saving
process.
If your PC or PDA is out of reach the locator will display an error code. To avoid these
errors disable the Bluetooth survey measurements transmission or ensure that your PC or
PDA is within range and correctly paired.
NOTE: A flashing depth and/or current reading display means that the
measurement is poor and should be taken again. Poor readings may be caused by
nearby conductors or sources of electromagnetic interference.
To obtain SurveyCERT for PDA:
SurveyCERT for PDAs and its operation manual are available as a free download from the
Radiodetection website:
1. Visit www.radiodetection.com.
2. Using the menu bar, go to Support -> SurveyCERT.
3. Click on the RD7000+ SurveyCERT link to get to the SurveyCERT download page
and follow the instructions.
key.
19