FLUX FMJ 100 Betriebsanleitung Seite 39

6 Commissioning
Attention!
If the material of the flowmeter is not resistant to the liquid
to be transferred, it must not be used.
•
Note!
Check if the materials of the flowmeter are appropriate for the
applications.
Note!
Generally replace a defect signalling cable.
7 In operation
Regularly check the flowmeter for function.
8 Repair
Warning!
When non-approved spare-parts are used persons can be hurt and
the machine/equipment can be damaged.
Only use spare and wear parts that are approved by the manufac-
turer.
> Depressurise the system.
> Separate pump from current.
> Empty hose, flowmeter and valves.
> Always replace defective parts.
> Only use genuine spare parts
Observe the chemical resistance and internal operating
instructions.
Attachment FLUXTRONIC FMJ 100 39 / 60