FLUX FMJ 100 Betriebsanleitung Seite 37

Use the Up or Down key to set the [LOC] level to 3.
The display is now again in "RUN: The volume to be filled is displayed".
A PIN can now be defined (default = "000").
Use the Up key to switch to "SET: General Settings"
Press Process key.
The PIN is still "000", therefore press Operate.
Select the [PIN] menu item using the Down key.
Press the Process key.
Using the left/right keys, select the relevant digit and enter the value of the digit using
the Up/Down keys.
Press the Operate key.
The display is now in "RUN: The volume to be filled is displayed".
From now on, items 2 to 5 can only be processed via the PIN
Attachment FLUXTRONIC FMJ 100 37 / 60